To use EQ Smart Level, power on the system, raise the front until the pin box clears the hitch, pull the truck away, and press Auto Level. It does the rest. If you need to start over, hit All Retract first, because auto level won’t run with the legs down.

Village Welcome! We’re Jimmy and Lisa. We had a lot of questions about how we level our 2022 Keystone Fuzion with EQ Smart Level by Equalizer Systems. So Lisa, our leveling boss, walks you through it.

Our last Fuzion had Lippert Level Up. But this one came with EQ Smart Level. Good news: it’s very simple once you know a couple of tricks.

What is EQ Smart Level?

It’s an automatic leveling system from Equalizer Systems that came on our 2022 Keystone Fuzion fifth wheel. It runs six jacks: four in the back and two up front.

You control it from a touch pad with a power button, arrow buttons, Auto Level and All Retract. So once you learn what each button does, setup and breakdown go fast.

How do you raise the jacks with EQ Smart Level?

There are two ways. The easy way brings all six feet up at the same time.

First, make sure you’re hooked to the truck. Your power should already be on at that point.

Way #1, the slow way: Press All Retract and wait. But here’s the catch. All Retract only brings up the four back legs. The two front legs stay down, so you have to raise those yourself after.

Way #2, Lisa’s favorite: The guy from Equalizer showed her this one. It isn’t really a secret, but it’s not spelled out in the directions either.

  1. Press and hold the front “down” arrow. That brings the front of the camper down.
  2. While still holding it, press All Retract.
  3. You’ll hear a series of beeps. Then let go.
  4. The system keeps going until all six feet come up together.
  5. When everything stops, power it off.

Then Lisa always does a walk-around to make sure every jack came up as far as it should. Only after that do we hit the road.

Jimmy and Lisa beside their fifth wheel before using the EQ Smart Level system
Getting ready to unhook and let the EQ Smart Level do its thing.

How do you unhook a fifth wheel with EQ Smart Level?

Power on, raise the front with the top arrow until you see a gap at the hitch, then unlock and pull away.

We filmed this part at Lisa’s favorite Harvest Host, Suttler Post Clydesdale Farm in Mechanicsville, Maryland. If you’re a Harvest Hosts member and haven’t been, put it on your list!

Here’s how Lisa does it:

  1. Turn the power on.
  2. Push the top arrow so the front of the trailer goes up.
  3. Keep going until the front feet touch the ground.
  4. Lift a little more, until you can see a small gap between the pin box and the fifth wheel hitch.
  5. Unlock everything, and Jimmy pulls the truck away.

Then you’re ready to level.

The village in your pocket

📱 Take the village with you

Got your own leveling trick? Share it with the village in the FindUsCamping app.

How does EQ Smart Level auto level work?

Press Auto Level and let it run. Most days, that’s all you need.

While it works, Lisa hooks up our seven-way cord so it’s up and out of the way. She uses a cord keeper from MORryde, one of her favorite gadgets. It sticks on with a magnet, so you can put it wherever you want. You just pass the plug through and spin it. Then she hangs the breakaway cable up there too, so nothing dangles.

When it’s done, the lights come back on and the power stays on. If something went wrong, it would show an error, like low voltage or excess slope. Ours finished just like it was supposed to, so we went right on setting up.

Can you control EQ Smart Level jacks by hand?

Yes, but there’s a rule. All four back jacks have to be on the ground and feel some pressure before it lets you work them manually.

Also, here are two more things we wish someone had told us:

  • Starting over: If you want to redo auto level, press All Retract first. Auto level won’t work while the legs are already down.
  • Stopping fast: If you need to stop for any reason, press any button. Or just hit power off. It stops right where it is, so you can regroup and start again.

What else helps an RV sit level and steady?

A couple of add-ons make a big difference, especially on rough or sloped spots.

  • Bigger jack feet: We added SnapPads to give the jacks a bigger footprint on softer, rougher ground.
  • Side-to-side levelers: When a site is really off side to side, we use levelers from Andersen. Here’s how we pair them in our Lippert Level Up post.

Want the basics for any rig? Check out our older guide on how to level an RV.

Quick answers

Does EQ Smart Level raise all six jacks at once? It can. Hold the front down arrow, press All Retract, wait for the beeps, then let go.

Why won’t my EQ Smart Level auto level start? The legs may already be down. So press All Retract first, then try Auto Level again.

How do you stop EQ Smart Level in an emergency? Press any button or turn the power off. It stops right away.

Can you use EQ Smart Level manually? Yes, once all four back jacks are on the ground with some pressure on them.

Got a leveling question?

We’re always happy to help. Plus, the village is full of folks who’ve leveled on every kind of site you can imagine. So download the FindUsCamping app and ask in the village chat. You can also join our newsletter, hop into the FindUsCamping Villagers group on Facebook, and catch more how-to videos on our YouTube channel. Until next time you find us camping, safe travels, y’all!

Village Welcome

📱 Get the FindUsCamping App

Pull up a chair! The app is where the village hangs out between campouts.

  • 🗺️ Villager Map – see which villagers are camped near you (only if they choose to share)
  • 💬 Village chat + private messages – ask questions, share photos, make plans
  • 🏕️ Campouts & RV Crawls – what’s coming up next, all in one spot
  • 🔔 Alerts – so you never miss news from the village

Village Welcome

Pull Up a Chair by the Fire

Get campout news, RV Crawl invites and Village stories in your inbox. No spam, just friends saving you a seat.

Leave a comment

Your email address will not be published. Required fields are marked *